Model t kit cars to build
With their exciting, racy styling, Track T roadsters are some of the most recognizeable hot rods in American automotive history. Designed for nostalgic originality, Speedway’s Track-T Roadster is an economical way to relive that vintage motoring spirit. This kit car turns heads wherever it goes with its beautiful, one-piece 1927 T body, smooth lines and custom track style nose. The Track-T is designed to use the powertrain from 4-cylinder or V6 powered rear wheel drive vehicles. In such a small, lightweight car they become mighty spirited performers.
The 1927 Track-T basic kit includes a 1927 Model T Roadster body with right and left full length side frame covers and custom floor with transmission tunnel. It also comes with a passenger compartment rear bulkhead divider, street rodder nose, rear roll pan, smooth flat cowl/firewall and front shock mounts. Headlight mounts, and hood top are also included. The storage compartment behind the seat is even large enough to accept 2-3 suitcases, or a large cooler & picnic basket.
The rigid tube steel chassis features front & rear kick-ups for a lower ride height and includes pre-mounted suspension bracketry. The chassis is built to accomodate a traditional spring-over, tube axle front suspension with Hairpin radius rods, Vega cross steering, and '49-'54 Chevy spindles. Rear suspension mounts will attach a solid axle to quarter elliptic springs with upper torque arms, Panhard bar, and tube shocks.
This product is made to order so quantities may vary. Please allow three to four weeks lead time.
Fiberglass Body One-piece '27 T body Street Rodder nose Full length frame covers (left & right sides) Rear roll pan Floor pan w/ transmission tunnel Passenger compartment rear bulkhead Steering column support (steel tube) Frame 2" x 3" x .120 wall square tube steel frame rails Round tube front & rear kick-ups Includes the following mounted brackets: front crossmember front spring perch shock/headlight bracket mounting pad front braces with steering box mount front radius rod mounting roids rear radius rod mounting roids "K" member rear spring mounting pads rear vertical hoop rear horizontal hoop fuel tank support tube rear shock mounting tabs rear Panhard bar mount rear bumper mounting pads under-engine crossmember* transmission mount (4" drop)* nose mounting straps* * (Customer to install) Headlight & Front Shock Mounts Shock/headlight mounting brackets